Hughes 9502 one-piece

Hughes 9502 one-piece

One-piece modem/antenna in a single outdoor unit.

The Hughes 9502 IP satellite terminal provides reliable connectivity over the Inmarsat Broadband Global Area Network (BGAN) for IP SCADA and machine-to-machine (M2M) applications. 9502 comes in two piece modem/antenna package or one piece modem/antenna in a single outdoor unit to suit your installation needs. C1D2 compliance option is available for intrinsic safety requirement to operate in oil and gas industry.

  • Integrated IP Watchdog to ensure “always-on” network connectivity. No manual intervention required to recover from an outage.
  • Auto-on/auto-context activation automatically restores power and PDP connection to itself following loss of power and/or IP connection.
  • Remote control via SMS—remote management platform for command and control to the terminal using SMS, including configuration, debugging, and access to Web interface.
  • Relay mode passes WAN IP address to the connected RTU.
  • Firmware upgrades over the air or local.
  • C1D2 option available.

pulsar by pivotel. click here to find out more.
 
Please note: use of satellite telecommunications services and devices may be prohibited or restricted in some countries.

The Pivotel Advantage

For a tailored pricing package please contact us on 1300 882 448 or email the Pivotel Sales Team

  • Dimension: 275 x 275 x 84mm
  • Weight: 3.8kg
  • Operating Temperature: -40°C to +75°C. Relative humidity 95% at +40°C.
  • Ingress Protection: IP66
  • DC input voltage: +12 Vdc/+24 Vdc nominal
  • Ultra-low power consumption Transmit: < 20 W, Narrow beam w/o transmit: 3 W, Idle (regional beam): < 1 W, Off (wake on packet): < 10 mW (@ 12 Vdc), Off (wake on packet): < 30 mW (@ 24 Vdc), Off (GPIO control): 0 W
  • Ethernet connection (RJ45)
  • USB–Type B for connection to configuration PC
  • RS-232 (DB9) to external NMEA 0183-based GNSS device (e.g., GLONASS receiver)
  • Hughes 9502 one piece BGAN M2M Terminal
  • Locking bar for padlock
  • Mounting screws and washers
  • Antenna basic fixed mount kit that includes pole, bracket, bubble level and azimuth elevation bracket. Can be fixed to vertical or horizontal surface. Applicable for both 9502 one piece and 9502 two piece antenna/ODU installation.
  • Antenna azimuth elevation bracket if you have an existing 1.6” or 2.0” diameter pole. Applicable for both 9502 one piece and 9502 two piece antenna/ODU installation.